92 results

Page 1 on 5
  • Would you like to learn more about the Tango internals and to know how to contribute to Tango kernel projects?  Now is your chance to hear directly from the kernel developers - Anton, and Geoff.

    The 4th Tango Kernel Webinar took take place on Wednesday 23rd June 2021 at 10:00 CEST (08:00 UTC).  The expected duration is 90 minutes.

    This webinar was focused on PyTango - an overview of the project and how to contribute.  The following topics have been covered:

    1. Introduction
    2. Repository overview
    3. Dependencies
    4. How to:  set up a dev environment, run the tests, add a new test
    5. Architecture overview
    6. Practical example:  code navigation while reading an attribute
    7. Useful tips
    8. Contribution workflow
    9. Questions

    Before the meeting, participants were welcome to checkout the git repo:  https://gitlab.com/tango-controls/pytango

    This meeting has been recorded and will be soon available on tango-controls youtube channel (https://www.youtube.com/channel/UCezS9cMkektZNItYnPOAQvg) or similar platforms.

    The Tango Kernel webinars are traditional Zoom meetings (limited to 100 participants) so participants are able to interact with the speakers and to ask questions directly or via the chat.

    Please click on READ MORE to get the slides.

    Read more

  • taurus.png

    We are happy to announce the release of Taurus 4.8.0.

    This release is relatively modest in terms of new functionality
    for the end-user because most of the effort was focused on
    project migration to gitlab.com and other developer-oriented
    improvements.

    This is the last release supporting python2 and Qt4. Work has already begun
    to prepare the next major version (taurus 5) and therefore taurus 4.8 will
    likely be the last in the 4.x series (no new features are expected to land
    on the 4.x series after this release).

    For those installing with conda, please note that taurus and all its
    dependencies are now distributed via the conda-forge channel:

    `conda install -c conda-forge taurus taurus_pyqtgraph`

    The source files can be downloaded from:

    https://pypi.org/project/taurus/4.8.0/

    The documentation (including installation instructions for different platforms) is available at:

    http://www.taurus-scada.org

    For a detailed list of changes, see the CHANGELOG:

    https://gitlab.com/taurus-org/taurus/-/blob/develop/CHANGELOG.md

    ...and the Jun21 milestone:

    https://gitlab.com/taurus-org/taurus/-/milestones/16

    If you encounter problems installing or running this release, please open an issue in :

    https://gitlab.com/taurus-org/taurus/-/issues

  • logo.png
    Hi all,

    We are happy to announce the release of Sardana 3.1.0.

    To read about new features we encourage you to see newly introduced What's new section in the Sardana Docs.

    The source packages and windows installers are available to download from HERE.

    It is also available on PyPI under THIS link.

    To install from PyPI, do:

    % pip3 install sardana

    or download the tarball, untar and run:

    % python3 setup.py install

    The documentation is available at:

    http://www.sardana-controls.org

    For a detailed list of changes, see the release notes:

    https://github.com/sardana-org/sardana/releases/tag/3.1.0

    ...and the issue tracker:

    https://github.com/sardana-org/sardana/milestone/8?closed=1

    If you encounter problems installing or running this release, please
    open an issue in:

    https://github.com/sardana-org/sardana/issues

    Cheers!

    Michal Piekarski (on behalf of all the Sardana Community)
  • cppTango-logo.png

    You would like to learn more about the Tango internals and to know how to contribute to Tango kernel projects? Now is your chance to hear directly from Emmanuel, one of the Tango C++ library original developers.

    The 3rd Tango Kernel Webinar took place on Wednesday 20th January 2021.

    This webinar focused on the Tango Events implementation in cppTango. It was presented by one of the original Tango C++ library developers, Emmanuel Taurel (ESRF - France).

    This meeting has been recorded and is available on tango-controls youtube channel (https://www.youtube.com/channel/UCezS9cMkektZNItYnPOAQvg).

    Please click on READ MORE to get the slides and direct links to the videos.

    Read more

  • You would like to learn more about the Tango internals and to know how to contribute to Tango kernel projects? Now is your chance to hear directly from Pascal, the Starter, Astor and Pogo creator.

    The 2nd Tango Kernel Webinar will take place on Wednesday 16th December 2020 at 10:00 CET (Paris time).

    This new webinar will focus on Starter/Astor and Pogo. It will be presented by the creator and current main maintainer of all these very useful Tango tools, Pascal Verdier (ESRF - France).

    This webinar will cover the following topics:

    • Starter/Astor structures and undiscovered features
    • Pogo structure and an introduction to DSL (Domain Specific Language)
    • Questions/Answers session

    This meeting will be recorded and available on youtube or similar platforms.

    You can already also save the date for another Tango Kernel Webinar on cppTango events, presented by Emmanuel Taurel (ESRF), which will take place on Wednesday 20th January 2021 at 10:00 CET (Paris Time).

    The Tango Kernel webinars are traditional Zoom meetings (limited to 100 participants) so participants will be able to interact with the speakers and to ask questions directly or via the chat.

    Please find below the link to the Zoom meeting (you don't need to register before the meeting for this kernel webinar, simply click on the link at the scheduled date and time):

    Topic: Tango Kernel Webinar
    Time: Dec 16, 2020 09:55 AM Paris

    Join Zoom Meeting
    https://esrf.zoom.us/j/98396817299?pwd=VWlOVGRYWlhqdmgyYkhHWE1HM05SUT09

    Meeting ID: 983 9681 7299
    Passcode: 228891
    One tap mobile
    +33170379729,,98396817299#,,,,,,0#,,228891# France
    +33170950103,,98396817299#,,,,,,0#,,228891# France

    Dial by your location
            +33 1 7037 9729 France
            +33 1 7095 0103 France
            +33 1 7095 0350 France
            +33 1 8699 5831 France
            +33 1 7037 2246 France
    Meeting ID: 983 9681 7299
    Passcode: 228891
    Find your local number: https://esrf.zoom.us/u/aiFiNAcMs

    Read more

  • I'm pleased to announce the immediate availability of a new stable release of the tango source distribution.

    It's available from here and therein you also find a list of relevant changes.

    In case you encounter issues, please don't hesitate to report them.
  • cppTango-logo.png

    You would like to learn more about the Tango internals and to know how to contribute to Tango kernel projects? Now is your chance to hear directly from the kernel developers - Reynald, Michal and Thomas.

    The first Tango Kernel webinar took place on Tuesday 3rd November 2020 at 9:00 am CET (8:00 am UTC) and was dedicated to cppTango, the Tango C++ library. The duration was about 90 minutes.

    The 1st Kernel webinar covered the following topics:

    1. Introduction
    2. cppTango repository overview
    3. cppTango dependencies
    4. How to compile cppTango?
    5. How to run the tests?
    6. How to add a new test?
    7. Architecture overview
    8. Practical example: Code navigation. What happens when an attribute is read?
    9. Questions

    It was a traditional Zoom meeting (limited to 100 participants) so participants could interact with the speakers and ask questions directly.

    Before the meeting, participants were invited to clone the cppTango git repository and to try to compile cppTango on their own, following the documentation present on the github repository.

    This meeting has been recorded and will be soon available on the new tango-controls youtube channel.

    Read more

  • logo.png
    Hi all,

    We are happy to announce the release of Sardana 3.0.3.

    IMPORTANT: This release is the first one supporting Python 3 only and is backwards incompatible. If you are already a Sardana user you will need to migrate your system before using this version.

    The source packages and windows installers are available to download from:

    https://github.com/sardana-org/sardana/releases/tag/3.0.3

    It is also available on PyPI:

    https://pypi.python.org/pypi/sardana

    To install from PyPI, do:

    % pip3 install sardana

    or download the tarball, untar and run:

    % python3 setup.py install

    The documentation is available at:

    http://www.sardana-controls.org

    For a detailed list of changes, see the release notes:

    https://github.com/sardana-org/sardana/releases/tag/3.0.3

    ...and the issue tracker:

    https://github.com/sardana-org/sardana/milestone/7?closed=1

    If you encounter problems installing or running this release, please
    open an issue in:

    https://github.com/sardana-org/sardana/issues

    Cheers!

    Áureo Freitas (on behalf of all the Sardana Community)
  • taurus.png

    We are happy to announce the release of Taurus 4.7.0.

    This release brings a lot of changes with respect to 4.6.1, among which are improved CLI,
    better selection of Qt bindings (Qt5 is now the default fallback), more customizable
    TaurusGuis, better support for plugins,...

    As a novelty, taurus (and taurus_pyqtgraph) can now also be installed using conda, with:

      `conda install -c taurus-org taurus taurus_pyqtgraph`

    Also note that this is quite probably the last release officially supporting python2.

    The source files can be downloaded from:

    https://pypi.org/project/taurus/4.7.0/

    The documentation (including installation instructions for different platforms) is available at:

    http://www.taurus-scada.org

    For a detailed list of changes, see the CHANGELOG:

    https://github.com/taurus-org/taurus/blob/master/CHANGELOG.md

    ...and the issue tracker:

    https://github.com/taurus-org/taurus/milestone/15?closed=1

    If you encounter problems installing or running this release, please
    open an issue in :

    https://github.com/taurus-org/taurus/issues

  • logo_Waltz_super_small.png

    Dear Tangoers,

    Waltz 1.0.x has been released!

    Shortly speaking this release introduces major changes in tech stack of Waltz:

    • plugable architecture
    • npm dependencies management
    • Vanila JS6+/RxJS middleware
    • Webpack/rollup plugins GitHub template repositories
    • UI/UX improvements

    Full release description can be found here: GitHub/waltz

    Live demo (feel free to use tango-cs/tango credentials): AmazonCloud

    Cheers,

    HZG & IK teams

  • logo_flipped.png

    Dear Tangoers,

    Tango Controls Steering committee and IK company have been looking closely to the COVID-19 situation during the several weeks. We are very sorry to say but up till now most of the countries keep their borders closed and travel is not permitted.

    Due to these circumstances which are beyond our control, the Tango Controls meeting 2020 is postponed from June to November 2020 in the hope that it will then be possible to travel and meet in St Petersburg. THe new dates are:

        November, 17-19 2020.

    We really hope that the situation in November will be safe and we all will be able to meet face-2-face and have a productive and exciting meeting in the beautiful city of St Petersburg! Thank you for understanding.

    In the meantime a compact virtual meeting is planned for the 10 June so that the community stays informed of progress for the core projects. More details to follow on this site.

    Looking forward to seeing you online in June and face-2-face in Saint Petersburg!

    We wish you all good health.

  • logo_flipped.png

    Dear Tangoers,

    We at IK Company, being organizers of the Tango Controls Users meeting 2020 at Saint Petersburg, observe the situation with COVID-19 very closely.

    As for now everything remains according to the schedule.

    However, taking into the account recent updates in many companies and their policies concerning business trips, we have prolonged the deadlines for registration, payment etc till May, 20th 2020.

     

    In case of any other changes we will inform you at once.

    We wish you all good health!

  • logo_flipped.png

    Tango Controls 2020 meeting contest

    From March, 9th till June, 9th 2020.

    Make a contribution and get All products pack from JetBrains for free!

    Registrants of the meeting have a chance to win a 1-year All products pack personal license from JetBrains!

    To be nominated, make a contribution(s) in a period from March, 9th till June, 9th 2020 to any repository in one or both of GitHub organizations: tango-controls or waltz-controls.

    Contribution can be everything: from making PR that fixes a typo or PR that performs a full scale refactoring or just creating an issue.

    Please create an issue with a link to your contribution in a dedicated repository to participate in the contest.

    The jury will choose 2 contributions to be awarded. Another 1 contribution will be chosen by the community.

    Register for the meeting and participate/vote!

  • 16-Dec-19-224641.jpg

    After only 10 months of shutdown for dismantling the old Storage-ring, adapting the injection system and installing the tens of tousands of pieces of equipments, the beam have been injected in the new storage ring at the foreseen date and within the foreseen budget.

    The Accelerator control system based on TANGO was ready at the d date for allowing the control room team to tune this brand new machine. TANGO thank's to it's modularity, flexibility and efficient design, allowed to prepare all the pieces of software well in dadvance on simulated devices and was the key of the success of the control system.

    Read more

  • logo_Waltz_small.png

    Dear Tangoers,

    I am pleased to announce new releases:

    Waltz - v0.7.4 and Tango Rest Server - 1.17

    New Waltz version features:

    • New look and feel compliant with material design
    • HintWidget
    • Performance improvements
    • Migration to NodeJS and new architecture, first steps

    Full info about the release can be found here: GitHub release - v0.7.4

    Live demo in Amazon cloud: link

    Use tango-cs/tango to authorize

    Tango Rest Server release 1.17:

    • Compatibility with JDK11+
    • Minor improvements

    Full info about the release can be found here: GitHub release - 1.17

    Please feel free to create issues including your wishes and ideas on GitHub

    Cheers,

    Igor

  • desktop.png

    We are pleased to announce that the latest TangoBox is available for launching on Amazon Web Services.

    The related AMI ID is: 

    ami-0a2e0cddaa68be39f

    It contains all the applications of standard TangoBox and RDP remote desktop connection. Please refer to the documentation.

    This image lowers the barrier even more for trying out and testing the full suite of Tango Controls tools!

    Thanks to S2Innovation for providing this useful service!

  • taurus.png

    The new Taurus 4.6.1 has been released.

    https://github.com/taurus-org/taurus/releases/tag/4.6.1

    The documentation (including installation instructions for different platforms) is available at:

    http://www.taurus-scada.org

    For a detailed list of changes, see the CHANGELOG and the issue tracker.

    PS: also, the taurus_pyqtgraph plugin (which adds pyqtgraph-based plot widgets) is now available from PyPI

  • logo_Waltz_small.png

    Dear Tangoers,

    I am pleased to announce new Waltz release - v0.7.3

    This version features (including v0.7.[0-2]):

    • New Dashboard with multiple profiles stored per user basis
    • TableWidget
    • PlotlyWidget
    • ListWidget
    • ManagerWidget 
    • Redesigned Tango device control panel
    • Redesigned Info panels
    • Bug fixes and optimizations e.g. using WebGL for plots

    Full info about the release can be found here: GitHub release - v0.7.3

    Waltz has been dockerized. It is now super easy to give it a try:

    $> wget https://raw.githubusercontent.com/waltz-controls/waltz/v0.7.3/docker-compose.yml
    $> docker-compose up
    $> firefox http://localhost:8080/waltz

    Open your browser and navigate to http://localhost:8080/waltz

    Or try a live demo in Amazon cloud: link

    Use tango-cs/tango to authorize

    Please feel free to create issues including your wishes and ideas on GitHub

    Cheers,

    Igor

     

    P.S. the project has been moved to a dedicated GitHub org: new link

92 results

Page 1 on 5