.

Average: 0
Rating Count: 0

Development status: New development
Information status: Updated
Repository: http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/Acquisition/2D/AcqPrinceton
Contact:



Class Description


Princeton CCD acquisition device

Families: Acquisition

Key words: 2D

Language: Cpp

License:

Contact:

Class interface


Attributes:

Name Description
binningSpectrum: DevLong
intensityNbZonesScalar: DevLong
intensityZone12Scalar: DevDouble
intensityZone11Scalar: DevDouble
intensityZone10Scalar: DevDouble
intensityZone9Scalar: DevDouble
intensityZone8Scalar: DevDouble
intensityZone7Scalar: DevDouble
intensityZone6Scalar: DevDouble
intensityZone5Scalar: DevDouble
intensityZone4Scalar: DevDouble
intensityZone3Scalar: DevDouble
intensityZone2Scalar: DevDouble
intensityZone1Scalar: DevDouble
roiSpectrum: DevLong
nbROIScalar: DevLong
ybinScalar: DevLong
xbinScalar: DevLong
roi1ymaxScalar: DevLong
roi1yminScalar: DevLong
roi1xmaxScalar: DevLong
roi1xminScalar: DevLong
shutterCloseDelayScalar: DevDouble
widthScalar: DevLong
useROIScalar: DevBoolean
triggerScalar: DevLong
timingScalar: DevDouble
temperatureScalar: DevDouble
shutterModeScalar: DevLong
saturationMaxScalar: DevDouble
saturationAlarmScalar: DevDouble
saturationScalar: DevDouble
rotateImageScalar: DevLong
numFrameScalar: DevLong
intensityBlackSpectrum: DevDouble
intensity0Spectrum: DevDouble
intensitySpectrum: DevDouble
imageImage: DevUShort
heightScalar: DevLong
framesScalar: DevLong
fileParmsSpectrum: DevString
fileNameScalar: DevString
fileFormatScalar: DevString
exposureScalar: DevDouble
depthScalar: DevLong
checkTemperatureScalar: DevBoolean
averageIntensitySpectrum: DevDouble
acqModeScalar: DevLong
absorptionSpectrum: DevDouble

Commands:

Name Description
StopInput: DevVoid
Output: DevVoid
Stops the current sequence of exposing
StartInput: DevVoid
Output: DevVoid
Starts exposing - the desired exposing mode (continuous or sequence) must be previously defined with SetMode() command
SetParamInput: DevVarStringArray
Output: DevVoid
None.
ResetIntensityBlackInput: DevVoid
Output: DevVoid
None.
OpenInput: DevVoid
Output: DevVoid
Reserves and initializes the camera hardware - Detects the characteristics of the CCD : width, height, depth wich can be read using the device`s attributes - Sets the desired temperature
GetParamInput: DevString
Output: DevString
None.
CloseInput: DevVoid
Output: DevVoid
Frees the current camera, prepares it for power-down
AcquireIntensityBlackInput: DevVoid
Output: DevVoid
Sets the intensityBlack attribute with the latest measured intensity
AcquireIntensity0Input: DevVoid
Output: DevVoid
Sets the intensity0 attribute with the latest measured intensity
StatusInput: DevVoid
Output: DevString
This command gets the device status (stored in its device_status data member) and returns it to the caller.
StateInput: DevVoid
Output: State
This command gets the device state (stored in its device_state data member) and returns it to the caller.

Pipes:

Properties:

Name Description
CamTypeDevLong Camera type 0 = Princeton
CamIdDevString Camera identifier


Please log in to comment.

22 Feb 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .



22 Feb 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .



16 Feb 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .



20 Apr 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .



23 Feb 2017, Piotr Goryl
Created:
The device class has been added to catalogue.
Added by:pgoryl2 on:23 Feb 2017, 10:08 a.m.