.

Average: 0
Rating Count: 0

Development status: Released, Release: Release_1_1
Information status: Updated
Repository: http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/Temperature/T95TempProgLinkam
Contact:



Class Description


Class for controlling the t95 Temperature Programmer from Linkam Scientific Instruments

Families: Instrumentation

Key words:

Platform: Unix Like

Language: Cpp

License:

Contact:

Hardware


Manufacturer: Linkam Scientific Instruments

Product:

T95 Temperature Programmer

Bus: Data Socket

Class interface


Attributes:

Name Description
TemperatureScalar: DevDouble
TempLimitScalar: DevDouble Sets temperature limit. Reads last set value.
RateScalar: DevDouble Sets the heating or cooling rate. Reads last set value.
SpeedScalar: DevLong Speed from 0 (off) to 30 (maximum)
CurrentActionScalar: DevString
ErrorInfoScalar: DevString

Commands:

Name Description
StateInput: DevVoid
Output: State
Device state
This command gets the device state (stored in its device_state data member) and returns it to the caller.
StatusInput: DevVoid
Output: ConstDevString
Device status
This command gets the device status (stored in its device_status data member) and returns it to the caller.
StartInput: DevVoid
Output: DevVoid
Start heating or cooling at the rate specified by the R1 command.
StopInput: DevVoid
Output: DevVoid
Tells the programmer to stop heating or cooling.
HoldInput: DevVoid
Output: DevVoid
If the programmer is heating or cooling will hold at the current temperature until either a heat or a cool command is received.
HeatInput: DevVoid
Output: DevVoid
Forces heating, if while heating the controller finds that the temperature is at the limit it will hold at that value, otherwise it will heat up to the maximum tempertature and stop.
CoolInput: DevVoid
Output: DevVoid
Forces cooling. if while cooling the controller finds that the temperature is at the limit it will hold at that value, otherwise it will heat up to the minimum tempertature and stop.
SetManualInput: DevVoid
Output: DevVoid
Set manual mode, where the pump speed is controlled by the command
SetAutomaticInput: DevVoid
Output: DevVoid
Set automatic mode, where the pump speed is controlled by the T95 unit

Pipes:

Properties:

Name Description
IpAddrDevString Ip Adress for connecting to the device
PortNbDevLong Port number
SimulationModeDevLong If 1 simualtion mode


Please log in to comment.

23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .



19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .



3 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Added by:pgoryl2 on:3 Jan 2017, 2:02 p.m.