This is historical information of device classes implemented in MenloSMA1000 device server.

Use this link to find the valid information.

Development status: Released
Information status: Updated
Repository: http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/OtherInstruments/MenloSMA1000
Contact:



Class Description


Extends Device_4Impl by functions to communicate with serial line devices.

Families: AbstractClasses

Key words:

Platform: Unix Like

Language: Cpp

License:

Contact:

Hardware


Manufacturer: none

Bus: Serial Line

Class interface


Attributes:

Commands:

Name Description
StateInput: DevVoid
Output: State
Device state
This command gets the device state (stored in its device_state data member) and returns it to the caller.
StatusInput: DevVoid
Output: ConstDevString
Device status
This command gets the device status (stored in its device_status data member) and returns it to the caller.

Pipes:

Properties:

Name Description
ConnectionDevString If the connection is made local (local) or remote (remote) via a terminal server.
HostDevString Hostname or IP of the terminal server for remote connection.
PortDevString Port used on the terminal server for remote connection.
DeviceDevString Device node used for local connection.
BaudRateDevULong Connection speed in bits/s. Used for local connections only.
DataBitsDevUShort Number of data bits. Used for local connections only.
ParityDevString Wheter and what kind of parity bit is used. May be none (N), odd (O), even (E), mark (M), or space (S). Used for local connections only.
StopBitsDevUShort How many stop bits are used - for local connections only.
FlowControlDevString Whether XON/XOFF (software), CTS/RTS (hardware) or no (none) flow control is used.
TimeOutDevUShort Connection timeout in deciseconds. It has to be between 1 and 255ds.

Class Description


Tangoserver for the MenloSystems repetition rate controller SMA1000.

Families: Controllers

Key words:

Platform: Unix Like

Language: Cpp

License:

Contact:

Hardware


Manufacturer: MenloSystems

Product:

SMA1000

Bus: Serial Line

Class interface


Attributes:

Name Description
LockboxActiveScalar: DevBoolean Whether the lockbox is turned on or off.
LockboxStableScalar: DevBoolean Whether the lockbox is locked or not.
LockboxSignalScalar: DevUShort Lockbox output signal in mV.
LockboxThresholdMinScalar: DevUShort Lockbox output minimum signal threshold in mV.
LockboxThresholdMedScalar: DevUShort Lockbox output medium signal threshold in mV.
LockboxThresholdMaxScalar: DevUShort Lockbox output maximum signal threshold in mV.
ActuatorTypeScalar: DevString May be stepper or analogue.
ActuatorDelayScalar: DevUShort Delay between two steps in ms (power-on default: 40ms). Limited by latency induced by main control loop.
ActuatorInvertScalar: DevBoolean Direction of actuator action. When set, an increase of actuator position decreases the lockbox voltage.\n
ActuatorAutoReverseScalar: DevBoolean Indicates whether automatic reverse of actuator action is active.
ActuatorPositionScalar: DevLong Actuator position in steps relative to position at startup.
ActuatorLowerLimitScalar: DevBoolean Whether the actuator has reached its lower limit.
ActuatorUpperLimitScalar: DevBoolean Whether the actuator has reached its upper limit.
ActuatorLimitFaultScalar: DevBoolean Indicates a limit detector fault (if the actuator is a stepper motor).
ActuatorAutoCorrectionScalar: DevBoolean Whether the automatic lockbox correction is active.
ActuatorTargetScalar: DevLong Write or read new target position of actuator. After writing, the actuator will slowly move to the requested position.
DeviceAddressScalar: DevUChar Device address used at multi node connections.
DeviceTypeScalar: DevUShort
DeviceIdScalar: DevString
DeviceHardwareVersionScalar: DevString
DeviceFirmwareVersionScalar: DevString
DeviceSerialNumberScalar: DevString

Commands:

Name Description
StateInput: DevVoid
Output: State
State Code
This command gets the device state (stored in its <i>device_state</i> data member) and returns it to the caller.
StatusInput: DevVoid
Output: ConstDevString
Status description
This command gets the device status (stored in its <i>device_status</i> data member) and returns it to the caller.
ResetInput: DevVoid
Output: DevVoid

Pipes:

Properties:

Name Description
ConnectionDevString If the connection is made local (local) or remote (remote) via a terminal server.
HostDevString Hostname or IP of the terminal server for remote connection.
PortDevString Port used on the terminal server for remote connection.
DeviceDevString Device node used for local connection.
BaudRateDevULong Connection speed in bits/s. Used for local connections only.
DataBitsDevUShort Number of data bits. Used for local connections only.
ParityDevString Wheter and what kind of parity bit is used. May be none (N), odd (O), even (E), mark (M), or space (S). Used for local connections only.
StopBitsDevUShort How many stop bits are used - for local connections only.
FlowControlDevString Whether XON/XOFF (software), CTS/RTS (hardware) or no (none) flow control is used.
TimeOutDevUShort Connection timeout in deciseconds. It has to be between 1 and 255ds.

23 Feb 2017, Piotr Goryl
Updated:
A device class has been added.
You can see previous version here .



23 Feb 2017, Piotr Goryl
Updated:
A device class has been added.
You can see previous version here .



23 Feb 2017, Piotr Goryl
Updated:
A device class has been added.
You can see previous version here .



23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You are looking at this version now.



19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .



19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .



19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .



19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .



2 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .



2 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .



2 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .



2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Added by:pgoryl2 on:23 Feb 2017, 10:56 a.m.