This is historical information of device classes implemented in OmsMaxV device server.
Use this link to find the valid information.
Development status:
Released
Information status: New
Contact:
Class Description
Pro-Dex/OMS servo motor controller
Families: Motion
Key words: MotorControllers
Platform: Unix Like
Language: Cpp
Contact:
Hardware
Manufacturer: Pro-Dex
Product:
MaxV series
Bus: VME
Class interface
Attributes:
| Name | Description |
|---|---|
| ServoOutputVoltageScalar: DevFloat | — |
| FlagMotorHomedScalar: DevShort | — |
| HomeFoundPositionScalar: DevDouble | — |
| ParkingActiveScalar: DevShort | — |
| ParkingAutomaticScalar: DevShort | — |
| ParkingSettleTimeScalar: DevDouble | — |
| ConversionScalar: DevDouble | — |
| InvertEncoderDirectionScalar: DevShort | — |
| InvertVoltageScalar: DevShort | — |
| AccelerationScalar: DevDouble | — |
| AccelerationUnitsScalar: DevDouble | — |
| VelocityScalar: DevDouble | — |
| VelocityUnitsScalar: DevDouble | — |
| PIDProportionalGainScalar: DevDouble | — |
| PIDIntegralGainScalar: DevDouble | — |
| PIDIntegralUpperSumLimitScalar: DevLong | — |
| PIDDerivativeGainScalar: DevDouble | — |
| PIDAccFeedforwardScalar: DevDouble | — |
| PIDVelocityFeedforwardScalar: DevDouble | — |
| PIDFrictionCoefficientScalar: DevDouble | — |
| PIDDeadbandHoldScalar: DevLong | — |
| PIDDeadbandHoldUnitsScalar: DevDouble | — |
| PIDDeadbandHoldTimeScalar: DevLong | — |
| PIDMaxOutputVoltageScalar: DevDouble | — |
| PIDServoVoltageDeadbandScalar: DevDouble | — |
| PIDServoOffsetScalar: DevDouble | — |
| PIDactiveScalar: DevShort | — |
| PIDstatusScalar: DevString | — |
| PositionScalar: DevDouble | — |
| PositionRawScalar: DevDouble | — |
| ResetModuloPositionScalar: DevDouble | — |
| RemainingMoveTimeScalar: DevDouble | — |
| FlagSlipStatusScalar: DevShort | — |
| FlagCwLimitScalar: DevShort | — |
| FlagCcwLimitScalar: DevShort | — |
| FlagOvertravelScalar: DevShort | — |
| FlagSetupReadyScalar: DevShort | — |
| FlagEncoderErrorScalar: DevShort | — |
| DoneDetectionModeScalar: DevShort | — |
| EncoderSlipToleranceScalar: DevLong | — |
| EncoderSlipToleranceUnitsScalar: DevDouble | — |
| SlipKillModeScalar: DevShort | — |
| RampDownLimitsActiveScalar: DevShort | — |
| SoftLimitMinUnitsScalar: DevDouble | — |
| SoftLimitMaxUnitsScalar: DevDouble | — |
| HomeOffsetUnitsScalar: DevDouble | — |
| AuxiliaryControlAtVelocityScalar: DevShort | — |
| AuxiliaryControlPolarityScalar: DevShort | — |
| ElectronicGearingActiveScalar: DevUShort | — |
| ElectronicGearingMasterAxisScalar: DevUShort | — |
| ElectronicGearingMasterAxisRatioScalar: DevLong | — |
| ElectronicGearingSelfAxisRatioScalar: DevLong | — |
Commands:
| Name | Description |
|---|---|
| StateInput: DevVoid Output: State |
This command gets the device state (stored in its device_state data member) and returns it to the caller. |
| StatusInput: DevVoid Output: DevString |
This command gets the device status (stored in its device_status data member) and returns it to the caller. |
| AbortMoveInput: DevVoid Output: DevShort |
Aborts move |
| CheckMoveInput: DevVoid Output: DevLong |
The function returns 1 if the motor is moving |
| LoadPositionInput: DevLong Output: DevShort |
None. |
| LoadPositionUnitsInput: DevFloat Output: DevVoid |
Set the current position in user units |
| MoveAbsoluteInput: DevDouble Output: DevLong |
None. |
| MoveAbsoluteUnitsInput: DevFloat Output: DevVoid |
Move to an absolute position in user units |
| MoveHomeInput: DevVoid Output: DevLong |
Homes the motor automatically. If no reference mark is found in either direction, it will generate an error. |
| MoveHomePositiveInput: DevVoid Output: DevVoid |
None. |
| ResetMotorInput: DevVoid Output: DevLong |
Reset the motor |
| GetBoardInfoInput: DevVoid Output: DevString |
None. |
| WriteReadInput: DevString Output: DevString |
None. |
Pipes:
Properties:
| Name | Description |
|---|---|
| BaseDevLong | VME card base address |
| ChannelDevLong | Channel number |
| TypeDevShort | Motor type. 0 -> Stepper motor 1 -> Servo motor 2 -> Stepper motor with encoder |
| IgnoreLimitSwitchesDevLong | set to 1: the server will ignore any limit switch signals, so you can move a motor with no switches connected set to 0: the server will honour limit switch signals |
| InvertParkingLogicDevShort | 0 means the Parking function is active when the Auxiliary bit is 1 1 means the Parking function is active when the Auxiliary bit is 0 |
| HomeLogicDevString | Defines the home logic (reference mark). Format is [Stepper home signal][Encoder reference][Encoder A][Encoder B]. See MaxV manual for more information. |
20 Apr 2017, Piotr Goryl
Updated:
The device class has been updated.
You are looking at this version now.
23 Feb 2017, Piotr Goryl
Created:
The device class has been added to catalogue.
Updated:
The device class has been updated.
You are looking at this version now.
23 Feb 2017, Piotr Goryl
Created:
The device class has been added to catalogue.
Added by:pgoryl2
on:20 Apr 2017, 1:13 p.m.