.

Average: 0
Rating Count: 0

Development status: Released, Release: Release_1_2
Information status: Updated
Repository: http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/MeasureInstruments/CAENelsAH501D
Contact:



Class Description


Tango server for the 4-channel bipolar picoamperemeter.

Families: Instrumentation

Key words:

Platform: Unix Like

Language: Cpp

License:

Contact:

Hardware


Manufacturer: CAENels

Product:

AH501D

Bus: Ethernet

Class interface


Attributes:

Name Description
FirmwareVersionScalar: DevString Current firmware version.
BiasVoltageScalar: DevFloat Voltage at bias output.
Offset4Scalar: DevDouble Offset current for channel 4.
Offset3Scalar: DevDouble Offset current for channel 3.
Offset2Scalar: DevDouble Offset current for channel 2.
Offset1Scalar: DevDouble Offset current for channel 1.
Average4Scalar: DevDouble Average current over Interval at channel 4.
Average3Scalar: DevDouble Average current over Interval at channel 3.
Average2Scalar: DevDouble Average current over Interval at channel 2.
Average1Scalar: DevDouble Average current over Interval at channel 1.
Value4Scalar: DevDouble Present current at channel 4.
Value3Scalar: DevDouble Present current at channel 3.
Value2Scalar: DevDouble Present current at channel 2.
Value1Scalar: DevDouble Present current at channel 1.
TriggerModeScalar: DevBoolean If set, the device will only take values while the trigger input signal is high.
IntervalScalar: DevFloat Interval for which the moving averages will be calculated.
RateScalar: DevFloat Achieved sampling rate.
ResolutionScalar: DevUChar Resolution of the ADCs.
RangeScalar: DevUChar Dimension of the expected current maximum.
ChannelsScalar: DevUChar Set the number of active input channels

Commands:

Name Description
SetOffsetInput: DevVoid
Output: DevVoid
Set the current averages as zero offset.
SyncInput: DevVoid
Output: DevVoid
Synchronize the internal ADCs. This command is to be used only for debugging purposes.
StopInput: DevVoid
Output: DevVoid
Stop data aquisition.
StartOnceInput: DevVoid
Output: DevVoid
Start data acquisition for one interval. If trigger mode is active, the device will only take data while the gate signal is in high state and only these times are used to determine the interval.
StartInput: DevVoid
Output: DevVoid
Start data acquisition. If trigger mode is active, the device will only take data while the gate signal is in high state.
StatusInput: DevVoid
Output: ConstDevString
Device status
This command gets the device status (stored in its device_status data member) and returns it to the caller.
StateInput: DevVoid
Output: State
Device state
This command gets the device state (stored in its device_state data member) and returns it to the caller.

Pipes:

Properties:

Name Description
PortDevString Portnumber used on the device.
HostDevString Hostname or IP address to the device


Please log in to comment.

25 Aug 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .



4 Aug 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .



5 Jan 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .



23 Sep 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .



23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .



19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .



2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Added by:pgoryl2 on:2 Jan 2017, 3:49 p.m.