Average: 0
Rating Count: 0

Development status: Released, Release: release_1_1_17
Information status: Updated
Repository: http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/MeasureInstruments/Lecroy/AcquireWaveformLecroy

Class Description

This class allows the acquisition of a waveform (the description and the data),

from a specific channel and from any Lecroy scope series. The description is a structure which contains in particular : the length of the array 1 (the raw data) the length of the array 2 (2nd part of the calculated waveform data, if any) the timebase the total length of the acquired data (lgth array1 + lgth array2) .... its represents the context of the acquisition.

NOTE : for all Lecroy scope, the port number is the same : 1861

Families: MeasureInstruments

Key words: - Lecroy

Platform: All Platforms

Language: Cpp




Manufacturer: Lecroy



Bus: Ethernet

Class interface


Name Description
triggerTimeScalar: DevString
verticalOffsetScalar: DevDouble
verticalGainScalar: DevDouble
horizontalOffsetScalar: DevDouble
horizontalIntervalScalar: DevDouble
nominalBitsScalar: DevShort
waveArrayCountScalar: DevLong
waveArray2Scalar: DevLong
waveArray1Scalar: DevLong
verticalScaledDataSpectrum: DevDouble
rawWaveformDataSpectrum: DevShort


Name Description
StateInput: DevVoid
Output: State
This command gets the device state (stored in its device_state data member) and returns it to the caller.
StatusInput: DevVoid
Output: DevString
This command gets the device status (stored in its device_status data member) and returns it to the caller.
WriteReadInput: DevString
Output: DevString
Command to send a specific command to the Lecroy device



Name Description
IPaddressDevString The IP address of the Lecroy scope to build a connection with.
ChannelNameDevString The name of channel on which the acquisition will be done. This name must be composed with two caracters : (a letter followed by a number) C for a physical channel F for a calculated waveform M for a memorised waveform ... Example : C2 (is the channel 2) Default : C1 (channel 1

Please log in to comment.


PDF generated from POGO


b'//-============================================================\n//\n// This class has been generated by POGO\n// (Program Obviously used to Generate tango Object)\n//\n// (c) - Software Engineering Group - ESRF\n//=============================================================\n\n\nFiles generated:\n===============\nAcquireWaveformLecroy.cpp: Source code for the AcquireWaveformLecroy class and its commands.\n This class is derived from DeviceImpl_2 class.\n It represents the CORBA servant obbject which\n will be accessed from the network.\n All commands which can be executed on the\n AcquireWaveformLecroy are implemented in this file.\n\nAcquireWaveformLecroy.h: Include for the AcquireWaveformLecroy class.\n Server class prototypes and descriptions.\n\nAcquireWaveformLecroyClass.cpp: A singleton class derived fromAcquireWaveformLecroy.\n It implements the command list and all properties\n and methods required by the AcquireWaveformLecroy once per process\n\nAcquireWaveformLecroyClass.h:\tInclude for the AcquireWaveformLecroyClass root class.\n This class is represents the singleton class for\n the AcquireWaveformLecroy device class.\n It contains all properties and methods which the \n AcquireWaveformLecroy requires only once e.g. the commands.\n\nmain.cpp:\t\tC++ source for a TANGO device server main.\n The main rule is to initialise (and create) the Tango\n system and to create the DServerClass singleton.\n The main should be the same for every Tango device server.\n\nClassFactory.cpp:\tC++ source for the class_factory method of the DServer\n device class. This method is responsible to create\n all class singletin for a device server. It is called\n at device server startup\n'

20 Apr 2017, Piotr Goryl
The device class has been updated.
You can see previous version here .

23 Feb 2017, Piotr Goryl
The device class has been added to catalogue.
Added by:pgoryl2 on:23 Feb 2017, 10:28 a.m.