49 results
-
The 2018 general assembly of the TANGO community took place from the 5th of June 2017 2 PM to, 8th of June 2017 5:00 PM at Dolní Břežany (Czech Republic) organized by ELI Beamlines
-
-
This workshop gave a general overview of the TANGO control system framework and its different aspects including latest developments.
-
We remind you that the TANGO collaboration meeting will take place in Florence, hosted by the Arcetri Astrophysical Observatory in the nice location of Convitto de La Calza, from June 6th to 8th.
http://www.tango-controls.org/community/events/31st-tango-collaboration-meeting/
All the seats have been taken - if you are still interested in attending then please follow the event via the online streaming. Details on how to follow the event online will be posted here as soon as they are known.
You can find the program here: https://www.ict.inaf.it/indico/event/514/
-
A Write-the-docs camp will be held in Grenoble. The camp will be a 3 day event to work exclusively on writing documentation for Tango.
-
Dear Tango Users,
I am pleased to announce first Tango Users Meeting in Russia.
The goal of this meeting is to gather Tango Users in Russia, share projects, experience and prepare a wish-list for the next Tango version. The results of this meeting will be presented on 31th Tango Users Meeting in Firenze.
The meeting will take place in Moscow on May, 18th 10-17:00.
The meeting will take place at:
Nastavnicheskiy per., 17, str. 1
Moscow
RussiaFeel free to join: http://doodle.com/poll/rmyvu2dcbw5b5c9w
Here is a draft of the timetable (will be updated once new talks are submitted):
Regards,
-
The next general assembly of the TANGO community will take place from the 6th of June 2017 2 PM to, 8th of June 2017 5:00 PM at Firenze (Italy) organized by the Arcetri Astrophysical Observatory , a member of INAF (National Institute for AstroPhysics)
You can find detailed information on Venue, Registration and Abstract submission here
The draft summary agenda is:
- 6th June 2017
- 9:00 to 12:30 Tango steering committee meeting (restricted session)
- 13:30 to 17:00 Tango Community meeting Plenary session 1
- 7th of June
- 9:00 to 12:30 Tango Community meeting Plenary session 2
- 13:30 to 17:00 Tango Community meeting Plenary session 3
- 8th of June
- 9:00 to 12:30 Tango Community meeting Plenary session 4
- 13:30 to 17:00 Closing session and Visit of the Arcetri Astrophysical Observatory
- 6th June 2017
-
Raphael Ponsard presented Tango on Zynq at the Xilinx Embedded Software conference held this week in San Jose.
-
3Controls is pleased to invite all interested companies and organizations to participate in the a new Tango Controls Training held 12th – 14th October 2016 in Krakow.
-
A team from the class "Lpro Systèmes embarqués" of the University of Grenoble has been selected as finalist of the Xilinx University contest 2015
Have a look of the project page and on the very didactic video
Congratulation to the students and the teacher (Raphael Ponsard)!This year, another team is participating to the 2016 edition of the contest with a new project with TANGO.
We wish them good luck -
HDB++ is a new archiving system for TANGO, based on events. The next HDB++ meeting will take place on 10 and 11 May 2016 at Elettra, Trieste. If interested, please contact lorenzo.pivetta@elettra.eu.
-
The SKA LMC TANGO Harmonisation meeting was held this week in Trieste. The meeting started with TANGO training and then went on to discuss 20 of the typical SKA use cases on how to implement the Local Monitoring and Control (LMC) using TANGO. The meeting highlighted the momentum of TANGO @ SKA. It was clear that a number of the sites working on SKA have acquired TANGO skills. The feedback provided by the experts allowed them to continue in the right direction. The SKA Office organised and chaired the meeting. TANGO is definitely picking up speed in the SKA project.
The meeting was hosted by INAF Trieste in the historical conference centre at Trieste. Historical for TANGO because this was the place where TANGO was first publicly presented at the ICALEPCS 99 conference in 1999. Trieste was as usual a great place to meet and discuss about TANGO again.
-
A meeting will be held to discuss the best way to use TANGO for the SKA project. The meeting is entitled :
More info and the program can be found on the meeting web page https://indico.skatelescope.org/event/377/ -
A TANGO workshop was held at the ICALEPCS 2015 conference on Sunday 18 October. Approximately 40 people attended. The workshop introduced new users to the concepts of TANGO and then went on to describing the new features in TANGO 9. All demos were done using the TANGO Virtual machine. There were many questions and discussions were lively. We thank the participants for their contribution. The format of the workshop proved to be well adapted to the audience.Most people found it useful to attend and learned a lot (even the old hands).
-
A Sardana workshop will take place at DESY, 6th to 7th of October 2015.
The emphasis will be on technical issues and we also plan to hear
some feedback from beamline scientists. Below you find a tentative
agenda. To help us preparing the workshop I would like to ask the
delegates of the Tango institutes to provide us with the number of
colleagues that will attend. Comments about the agenda are also
welcome.Please contact Thorsten Krachts if you plan to attend.
Tentative agenda Sardana workshop at DESY:
October 6th, morning session
- short overview, for newcommers
- status reports
- experiences from BL scientistsOctober 6th, afternoon session
- organization of collaborative work
- technical issues
+ continuous scans
+ repeated scan points (if you have to change
an absorber, you have to repeat the scan point)
+ default hooks for ALL scans
+ scanMin, ScanMax, scanDelta, scanIndex should be available
during the scan.
+ additional output window (something like self.output but
pointing to another window)October 7th, morning session
- continue on technical issues
- SEPs, TEPs
- wrap-up -
ELI-ALPS has an Industrial Information Day on 2nd of June and we would kindly invite you. It will focus on the following topics: Command Control, Safety Systems and Custom Vacuum Systems. The attendance of the Industrial Information Day is free of charge, but registration is obligatory. You can check the program and register at the website:
-
A TANGO workshop took place as part of the ICALEPCS 2015 conference in Melbourne.
The TANGO workshop presented the TANGO control system toolkit. The basics of TANGO and how to write a device server and client were introduced. Then attendees learned how to build graphical user interfaces using Taurus. An overview was given of all the bindings to tools and languages which are available for TANGO. The second half of the workshop was dedicated to the historical archiving system solutions, how to install and use them. The last session was dedicated to advanced features in TANGO. The day concluded with a question and answer discussion session.
-
TANGO was demonstrated at the recent Open Hardware Algerie meeting at the Université des Science Technique Houari Boumedien (USTHB) in Alger. It generated quite a lot of interest and who knows maybe in the future TANGO will be running some hardware in Algeria. Check out the Open Hardware Algerie page for more info.
-
Today a group of French students studying for Licence Pro at the Lycee Gresivaudan Meylan close to Grenoble presented their understanding of TANGO Control systems after four afternoons learning and playing with TANGO. The result (in French) is available online.
49 results