.

Average: 0
Rating Count: 0

Development status: Released, Release: initial
Information status: Updated
Repository: http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/Temperature/Pico104
Contact:



Class Description


Device Server for the PT-104 Thermistor Converter, Pico Technology Ltd.
The PT-104 is a 4 channel, high resolution temperature converter used with PT100 and PT1000 sensors. It can be used for temperature, resistance and voltage measurements.

Families: Temperature

Key words:

Language: Cpp

License:

Contact:

Class interface


Attributes:

Name Description
Dev_versionScalar: DevString
Dev_calib_noScalar: DevString
Dev_calib_dateScalar: DevString
Dev_batch_noScalar: DevString
CyclesScalar: DevULong
ChannelsSpectrum: DevLong
Channel_typesSpectrum: DevUShort
Channel_wiresSpectrum: DevUShort

Commands:

Name Description
StateInput: DevVoid
Output: State
This command gets the device state (stored in its device_state data member) and returns it to the caller.
StatusInput: DevVoid
Output: DevString
This command gets the device status (stored in its device_status data member) and returns it to the caller.
ResetInput: DevVoid
Output: DevVoid
None.
ConfigureInput: DevVarUShortArray
Output: DevVoid
Set channel configuration. Needs 3 parameters: channel number, sensor type & number of wires. Only the channels that will be used for readings should be configured. The command should be called before attempting to read from channels.

Pipes:

Properties:

Name Description
MainsDevShort Select the mains frequency: - 0 means 50 Hz - 1 means 60 Hz.
Port_noDevShort Serial port number for PT-104 connection. Set to: 1 for COM1 2 for COM2 3 for COM3 4 for COM4.


Please log in to comment.

Generated

PDF generated from POGO



README

b"Some Notes about the Pico104 Device Server\n\nPlease note that for the moment, there is no Linux version of the PT104 device driver. \nThere is a device communication library available for windows only. \nYou may check http://www.picotech.com for new/updated software.\n\nThe device server was compiled using the MS Visual C++ 8.0 compiler: .vcproj and .sln files can be found in the msvc/8.0 directory. \nThe information stored on svn applies to the debug release only. \nTo compile a non-debug release you must select the corresponding TANGO & OMNI libraries (the ones that don't have a trailing 'd').\n\nThe C/C++ preprocessor must be able to find the pt104.h file, stored in the pico_tech/ directory. \nAlternatively, you may look for the header file on http://www.picotech.com.\n\nApart from the TANGO and OMNI libraries, the linker also needs the pt104ms.lib file. \nA possibly outdated version of this library can be found in the pico_tech/ directory. \nCheck the above mentioned site for current versions of the library.\n\nIf you use Jive to test the PT104 device, bear in mind that the device driver response is slow. \nDo check that Jive timeouts are set to higher values than the usual ones!\n\n\n\nWeird behaviour/possible bug:\n\nApparently, the Reset command cannot delete previous channel configurations. \nIt might be that this is a communication software bug, rather than a feature."

20 Apr 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .



23 Feb 2017, Piotr Goryl
Created:
The device class has been added to catalogue.
Added by:pgoryl2 on:23 Feb 2017, 11:40 a.m.