Development status:
New development
Information status: New
Repository:
https://svn.code.sf.net/p/tango-ds/code/DeviceClasses/MeasureInstruments/MicroEpsilonILR118x
Contact:
Class Description
Device server for the Micro-Epsilon optoNCDT ILR 1181-30 and 1182-30. Does not support alarm function and trigger mode.
Families: MeasureInstruments
Key words:
Platform: All Platforms
Language: Cpp
Contact:
Hardware
Manufacturer: Micro-Epsilon
Product:
ILR118x
Bus: Serial Line
Class interface
Attributes:
| Name | Description |
|---|---|
| DistanceScalar: DevFloat | Measured distance to target. |
| ModeScalar: DevUChar | Operation mode: 0 = Normal distance tracking (standard) 1 = Distance tracking up to 7 m (see manual!) 2 = Distance tracking with cooperative target at 10Hz (best accuracy) 3 = Distance tracking with cooperative target at 50Hz |
| IntervalScalar: DevUChar | Number of moving average samples 1 means feature is turned off Maximum is 20. |
| FrequencyScalar: DevFloat | Sets the rate of measured values per second. If the target reflects poorly you`d have to decrease this. If set to 0, the detector will automatically determine the fastest rate possible. |
| SlopeScalar: DevFloat | Scales the measured values according to this factor. May be used for parallax error correction. |
| OffsetScalar: DevFloat | — |
| TemperatureScalar: DevShort | Internal detector temperature. |
| DeviceScalar: DevString | — |
| SerialNumberScalar: DevString | — |
| FirmwareVersionScalar: DevString | — |
Commands:
| Name | Description |
|---|---|
| StateInput: DevVoid Output: State Device state |
This command gets the device state (stored in its device_state data member) and returns it to the caller. |
| StatusInput: DevVoid Output: ConstDevString Device status |
This command gets the device status (stored in its device_status data member) and returns it to the caller. |
| StartInput: DevVoid Output: DevVoid |
Start data acquisition. |
| StopInput: DevVoid Output: DevVoid |
Stop data aquisition. |
Pipes:
Properties:
| Name | Description |
|---|---|
| ConnectionDevString | If the connection is made local (local) or remote (remote) via a terminal server. |
| HostDevString | Hostname or IP of the terminal server for remote connection. |
| PortDevString | Port used on the terminal server for remote connection. |
| DeviceDevString | Device node used for local connection. |
| BaudRateDevULong | Connection speed in bits/s. Used for local connections only. |
| DataBitsDevUShort | Number of data bits. Used for local connections only. |
| ParityDevString | Wheter and what kind of parity bit is used. May be none (N), odd (O), even (E), mark (M), or space (S). Used for local connections only. |
| StopBitsDevUShort | How many stop bits are used - for local connections only. |
| FlowControlDevString | Whether XON/XOFF (software), CTS/RTS (hardware) or no (none) flow control is used. |
| TimeOutDevUShort | Connection timeout in deciseconds. It has to be between 1 and 255ds. |
| AutoReconnectDevString | Whether the server will automatically try to reconnect on errors. |
Please log in to comment.
Created:
The device class has been added to catalogue.